|
|
|
|
|
|
Masterplaten 920 YMI-II
|
Automatic Platen Foil Stamping
and Diecutting Press
|
|
Quick Loading/Unloading of Foil Rolls
The foil feeder seat is extractable for quick loading and unloading and unloading of foil rolls.
Motor Driven System for Feeding Pile
The position of feeding pile in transversal direction is micro adjustable with a motor-driven worm gear.
Honeycomb Chase
1. High heat resistance, high dimensional stability.
2. With foil guide roller for smooth foil advance.
Overload Protector
The overload protector consists of a torque limiter and emergency stop device. It quickly responds to an overload and instantly stops the machine when an incident occurs. This is one of the many safety devices for the highest protection of operator and equipment.
Longitudinal Direction Foil Feeding
1. With 3 foil feed motor.
2. Foil feeding system with less turning points in the foil path, consistent foil tension and less foil elongation.
Transversal Direction Foil Feeding
1. With 2 foil feed motor.
2. All upper rollers on foil rewinder can be lifted at one time or one by one for foil to pass through. This is an important time-saving design for job setup and changing foil rolls.
3. Foil rewinder with tension control.
4. For maximal utilization of hot foil.
Blasting Nozzles for oil Separation
1. Multiple blasting nozzles configured for best separation of foil.
2. Air volume easily adjustable from operation side.
Delivery Brush Rollers for Longitudinal Direction Foil
The brush rollers are servo-motor controlled and synchronized with foil feeding rollers for best foil tension.
Used Foil Rewinder for Longitudinal Direction foil (optional)
1. Independent device used for foil rewinding.
2. With 6 individually controlled servo-motors.
3. Automatic tension control.
4. Pneumatically controlled expansion/contraction of rewinder shaft for easy mounting and discharge of used foil core.
The specifications
Maximum sheet size 920mm x 650mm
Minimum sheet size 360mm x 320mm
Maximum die cutting size 910mm x 630mm
Maximum stamping size 900mm x 600mm
Paper standard 90~2000 g/sqm
Paper standard 0.1~ 2.0 mm
Paper standard (Cardboard) corrugated board<=4mm
Max. pressure protect system 250 T (each unit)
Max. speed (Stamping) 6500 sheets/hour
Standard stamping accuracy <= ±0.075mm
Max. speed (Hologram) 5500 sheets/hour
Hologram accuracy <= ±0.2mm
Hologram anti-forgery units 3 units
Max. diameter of foil reel in longitudinal/Transversal dia. 250mm/200mm
Heating zone 20 zones,40~180°C
Foil servo system 3 longitudinal + 2 Transversal
Rate wattage 11 KW
Dimension (L x W x H) 5400mm x 4500mm x 2120mm
Weight 15T
Air Supply 0.55~0.7 Mpa,>0.6m/min
In the interest of product improvement, we reserve the right to change specifications and features without notice.
|
|
|
|
