|
|
|
|
|
|
Masterplaten 900 Cylinder
|
Automatic Cylinder Foil Stamping Machine
|
|
Foiling Control System
1. Date input and processing with the keyboard.
2. Three precision foil pull systems.
3. Foil delivery with the help of imported a precision servo-motor controlled by a computer, the pull precision being ±0.1mm.
4. Setting of different foil pull lengths and speeds.
5. Temperature indication by LCD of the temperature control device.
6. Error display and automatic warning make it easy for the operator to remove any trouble.
7. The fourth and fifth foil pull systems. (optional)
8. Registering and stamping of holographic anti-forgery labels. (optional)
9. Automatic calculating of the used foil length and automatic warning when the foil is used up.
10. Foil pull and rewind rollers are equipped with friction anti-sliding clutch sleeves to ensure the uniform tension of the foil.
11. Repeatable and programmable job storage functions.
12. The tolerance of temperature control and display of actual temperature is ±2°C.
13. Automatic skip foil pull and automatic cleaning for saving foil.
14. All the electric elements with reliable performance are imported from abroad, which leads to gauge installation, safety, and reliable.
Cylinder
1. After dynamic balance adjustment and fine grinding treatment, the impression cylinders will run again like new.
2. The hot stamped products will be as good as ever, showing every detail.
3. Imported gripper pads are used for smooth gripping.
4. Uniform pressure and linear contact, suitable for large area and special stamping such as refractive stamping and ground stamping.
5. All the replaceable components and accessories have been overhauled or replaced with new ones.
6. The factory requirements of the original Heidelberg model are met, with precise registering performance, suitable for thin stock and thick stock.
7. The single gripper pad feeding, unmatched thin stock precise registering.
Machine Base
1. The slides on the machine base have been ground for smooth and noiseless operation.
2. All the old drive racks and gears have been replaced with the new original ones.
Foil unwind roller
1. Two foil unwind rollers, with the foil roll diameter being 85mm.
2. The foil roll diameter can be as big as 130mm (about 800m in length) (optional).
3. Tension control system for holographic anti-forgery foil stamping (optional).
Honeycomb Plate
1. Separate heat zones plateform, with three separate temperature control zones, automatic adjustment after temperature set-up.
2. Honeycomb base clamping lock can be fine adjusted, easy for operation.
3. Even temperature, suitable for large area hot stamping, fine stamping and special stamping.
4. Spare honeycomb base saves plate-change time. (optional)
The specifications
Maximum Sheet Size 640 x 900 mm
Minimum Sheet Size 290 x 400 mm
Sheet Thickness 70~350 g/sqm
Maximum Stamping Area 600 x 840 mm
Gripper Margin 8~10 mm
Stamping Die Height 7.0 mm
Cylinder Diameter 540 mm
Packing Thickness 1.5 mm
Feed Pile Height 340 mm
Delivery Pile Height 510 mm
Number of Heat Zone 3 Zones
Number of Pull Rollers 3 Rollers
Foil Pull System Computer Programmable
Maximum Temperature 240°C
Maximum Diameter of Foil Roll 85 mm
Speed (Sheets/Hour) 750~2500
Core of Foil Roll 25.4 mm
Power required For Drive 10.8 KW
Power required For Heater 17.0 KW
Dimensions (L x W x H) 4000 x 2550 x 1940 mm
Approximate Weight 7000 kg
In the interest of product improvement, we reserve the right to change specifications and features without notice.
|
|
|
|
