|
|
|
|
|
|
Masterplaten 1060 M
|
Automatic Die-Cutting Machine
|
|
Masterplaten 1060 inherits various advantageous structures of the Masterplaten die cutting machines. Man-machine engineering and industrial exterior design were kept in mind when the machine was being developed. Masterplaten l060 is CE certified. It's a versatile machine with benefits such as cost-savings, high speed and high efficiency.
Feeder
The feeder is made of lightweight aluminum alloy with hard coat anodizing finish and designed with ease of adjustment to suit various paper stock. Detectors are provided to prevent the feeder from damage if the feeder pile accidentally ascends beyond the safety point.
Deceleration of Paper Speed at Front Guides
A speed selector is provided to select a lower speed of paper prior to arriving at front guides when running thin paper to prevent it from getting curled or a regular speed when work
Side Guides
The side guides on MK-l060 were delicate.This is a time-saving feature for job changeover.
Single-Position Engagement Clutch
This special clutch makes it possible to run the feeding and die cutting units separately in the set of a new job. When an urgent stop occurs this clutch enables the die cutting unit to keep running at a gradually reduced speed. After the error is corrected and the machine is restarted, the die cutting unit can resume its speed in a very short period of time and the first sheet can be fed to the exact position at the die cutting unit. This clutch greatly saves time in the setup of a new job and decreases wasted paper.
Patented Gripper Bar
Gripper bars are made of lightweight, low inertia, high rigidity and abrasion resistant aluminum alloy with hard coat anodizing finish. It features consistent and accurate registration in high-speed die cutting, embossing and creasing.
Overload Protection
Masterplaten 1060 Die Cutter has a unique safety device consisting of a torque limiter that stops the gripper bars immediately and disengages the electromagnetic clutch of the main motor to instantly stop the machine when an overload occurs due to machine or operator fault. This unique safety device provides the highest safety to the equipment as well as the operator.
The Delivery
A depressor brush is used to help unload paper from grippers and place die cut sheets neatly on the delivery pi1e. The position and angle of this brush can be easily adjusted to suit paper stock in different gauges even in production.
The specifications
Maximum sheet size 1060mm x 760mm
Minimum sheet size 450mm x 370mm
Maximum die cutting size 1045mm x 745mm
Paper standard 90~2000 g/sqm
Paper standard 0.1~ 2mm
Paper standard (Cardboard) corrugated board<=4mm
Max. pressure protect system 260 T
Max. speed (Die cutting) 7800 sheets/hour
Standard stamping accuracy <= ±0.075mm
Rate wattage 18.6 KW
Dimension (L x W x H) 5437mm x 4050mm x 1950mm
Weight 15T
Air Supply 0.55~0.7 Mpa,>0.6m/min
In the interest of product improvement, we reserve the right to change specifications and features without notice.
|
|
|
|
